|
|
|
|
| Suspension Springs (order taper pins below if needed) | ||||
| Picture | Item # | Description | In Stock | Price |
 |
HS248/3 | Hermle/Keininger Suspension
Spring for a Grandfather Clock Size Wood Stick pendulum. Larger than pictured to the left. Silver color steel upper and lower blocks. Measures 15/32 inch x 1 inch .09mm thick |
Yes | $23.50
|
|
HS248/1 | Hermle/Keininger Suspension Spring
for a Grandfather size (Cable Wind) Lyre pendulum. Larger than pictured to the left. Silver color steel upper and lower blocks. Measures 15/32 inch x 1 inch .07mm thick |
Yes | $23.50
|
|
HS0062 | FITS HERMLE SERIES: 461, 1151, 1161 1171, 2061, 2071 Suspension Spring for Hermle Grandfather Clocks and Large Wall Clocks Often used on older Ridgeway, Howard Miller and Emperor Grandfather Clocks Generally used for larger, heavier pendulums Measures 5/16 inch x 11/16 inch .05mm thick 2.4mm spring length |
Yes | $23.50
|
|
HS0060 | FITS HERMLE SERIES: 140, 141, 150, 240, 241, 260, 261 340, 341, 350, 351, 451, 1050, 1051 Suspension Spring for Hermle Wall, Mantel. and Grandmother Clocks Measures 5/16 inch x 11/16 inch .04mm thick 2.4mm spring length |
Yes | $23.50
|
|
JS302 | FITS JAUCH SERIES: 77 AND 78 Suspension Spring for Chain Driven Jauch movements with Westminster or Triple Chime Often used on Emperor and Viking Clocks Plate size is approximately 6" x 9" (Large Plate Grandfather size) 96-110 cm pendulum lengths Measures 27.0 mm x 12.0 mm .06mm thick Hole-to-Pin length is 16.5mm |
Yes | $23.50
|
 |
US202 | Suspension Spring for Jauch and
Urgos movements made before 1980 Wall, Mantel, and Grandfather Clocks Generally used on the Jauch movement with "shoulders." Longer flex between metal blocks Measures 18.0 mm x 8.0 mm .05mm thick Hole-to-Pin length is 13.0 mm |
Yes | $20.50
|
 |
UW-GF | FITS URGOS SERIES: UW03 AND UW66 Suspension Spring for Urgos Grandfather Clock Measures 1-11/16 inch .008mm thick |
Yes | $31.25
|
|
UW-GM | FITS URGOS SERIES: UW32 Suspension Spring for Urgos Grandmother Clock Smaller of the two "hook" Suspension Springs Measures 1-1/8 inch .008mm thick |
Yes | $34.95
|
 |
TP127 | Taper Pins Package of 24 assorted steel taper pins. Generally used to hold plates together on antique clocks to mount dials to movements and to hold suspension spring in place at the top |
Yes | $8.95
|
|
Copyright
© 1985-2012 Antique Watch & Clock World All rights reserved |
